Filter
Top Products
29
Editing a Recipe:
1. In the recipe list mode, press “RECIPES.”
2. Recipe name should be flashing.
3. Use the following instructions to make changes:
• To change recipe name, use numeric keypad.
• To change cycle, press a cycle key.
• To change temperature, press an arrow key.
• To change cook time, press the “COOK TIME” key.
4. Press “SET” or “ENTER” to save the recipe.
Using a Recipe:
1. To use a programmed recipe, scroll through the list and press
“ENTER” or “SET” to select and start the program.
Deleting a Recipe:
1. In the recipe list mode, press “RECIPES.”
2. Recipe name should be flashing.
3. Use right “CLEAR” key to erase the name.
4. Press “SET” or “ENTER.”
Oven Settings
Product Controls
28
This Recipe Function accesses,
programs, and saves cooking
cycles from favorite recipes.
Entering Recipe Name:
This function programs and
saves up to 100 cooking cycles
from favorite recipes. Recipe
names are entered on the numeric keypad on the right side of the
keyboard. When a key with several letters is pressed for the first time,
the first letter is entered. If the same key is pressed a second time, the
second letter is entered, and so on. For example, if the key “2 ABC” is
pressed once, the letter ‘A’ is entered. If the key is pressed two times,
the letter ‘B’ is entered. If the key is pressed three times, the letter ‘C’
is entered. If the key is pressed four times, the digit ‘2’ is entered.
Then lower case ‘a’, then ‘b’, then ‘c’, then ‘A’ again, and so on.
If nothing is pressed within 2 seconds, the cursor moves to the next
position. To return to the previous position use the right “CLEAR” key.
Pressing the ‘1’ key will also move the cursor to the next position as
well as entering a space.
When subsequent characters are entered, the case and type of the
character matches the previous character. For example, if the previous
character is a digit, then pressing the “2 ABC” key once would result
in the digit ‘2’. If the previous character is a lower case letter, then
pressing the “2 ABC” key once would result in the letter ‘a’.
Entering a new Recipe:
1. Press “RECIPES” twice.
2. “NAME” should be flashing.
3. Enter a recipe name using numeric keypad.
4. Press a Bake function key.
5. Use arrow or numeric keypad to set the temperature.
6. If needed, hit “COOK TIME” key to enter cook time.
7. Press “SET” or “ENTER” to save the recipe.
Oven Settings
Product Controls