Filter
Top Products
CONTROL PANEL
Disconnect the electrical
power and follow lockout
/ tagout procedures
The Control Panel holds the
thermostats, indicator lights
and power switch, and is
connected to the Control
Plate with a Panel Connector
1. Remove the four screws
securing the control
panel. There are two
screws at each end of the
panel.
2. Pull the control panel
forward and disconnect
the electrical panel
connector near the right
end.
3. Reverse the procedure to
install.
BULLNOSE
Disconnect the electrical
power and follow
lockout / tagout
procedures
The Bullnose acts as a front
rail or shelf during griddle
operation.
1. Remove the Control
Panel.
2. The bullnose assembly is
secured with several
screws, one each end of
the bottom of the
assembly and several
more (depending on
size) facing the griddle
plate.
3. Reverse the procedure
to install.
-
6 -