Wells WM-TR II Water Dispenser User Manual


 
PERIODIC CLEANING - Delime Internal Heating Tank
PRECAUTIONS: Water in main tank is EXTREMELY HOT
(around 200ºF)
FREQUENCY: Weekly
TOOLS: Wells Deliming Solution Bottle (p/n 85377)
Plastic Scouring Pad
Clean Cloth or Sponge
Kay Orange Neutralizer and Delimer (Kay p/n 55905)
Begin with the HEATER SWITCH
ON, MAIN TANK full and at
temperature (i.e. HEAT light not lit), and with SATELLITE full of hot
water.
Disconnect water to unit, or turn off main water supply valve.
Pour contents (1 oz.) of Neutralizer and Delimer packet into the plastic
solution bottle.
Fill the rest of the bottle with hot water from the satellite faucet.
Attach quick-disconnect fitting cap on bottle.
Invert the solution bottle over the quick-disconnect fitting on the
dispenser. Insert the bottle until it locks into place.
Squeeze solution bottle until all solution is forced into dispenser.
Press release on quick-disconnect. Remove solution bottle. Wipe clean
the quick-disconnect fittings. Rinse solution bottle with clean water.
Press TANK HEATER SWITCH to
OFF [O]. Allow cleaning solution to
soak in main tank for 30 minutes.
CONTINUED ON PAGE 12
CLEANING INSTRUCTIONS (continued)
11
FIRST AID
EYES: In case of contact,
immediately flush with warm
water for 15 minutes.
Contact a physician if
irritation persists.
SKIN: Wash with soap and
water.
Contact a physician if
irritation persists.
INGESTION: If swallowed,
drink plenty of water and
contact a physician
KAY CHEMICAL CO.
EMERGENCY PHONE
(800) 304-0824
INGREDIENTS
Organic acids. Non-toxic
when used as directed.
For description of features
refer to page 2.
M707 p/n 306692 OpManual WM-TR II