Filter
Top Products
Operating Instructions
Continued
The drawings in this book may vary slightly
from your dishwasher model. They are designed
to show the different features of all the models
covered by this book.
NOTE: Your model may not include all the
features shown.
Before starting your dishwasher
1. Properly load the top and bottom racks, and
silverware basket.
2. Spin the Upper and Lower Spray Arms to make
sure nothing will stop them from turning freely.
3. Add detergent. See page 19.
4. Check rinse agent dispenser. See page 20.
5. Push door firmly when closing and it will
automatically latch.
6. Run hot water at sink nearest dishwasher until
it is hot. Turn it off.
Starting your dishwasher
1. Press the CYCLE pad once to display the cycle
and options. Skip to step 4 if you want to use the
cycle and options shown on the display.
2. Press the CYCLE pad until the cycle you want is
shown on the display. The time remaining in the
cycle and “MINUTES” are shown on the
drsplay. Each press of the CYCLE pad ad-
vances the display to the next cycle.
3. Press the OPTIONS pad until the option you
want IS shown on the drsplay. Each press of the
OPTIONS pad advances the display to the next
option.
4. Press the START/FAVORITE pad.
NOTE: Cycle, options, and favonte selectrons are
erased by a power farlure.
4