Filter
Top Products
Operating Instructions
Continued
3. Press the DELAY/PAUSE pad again to select
a 1 hour delay. Pressing the pad again adds
another hour of delay to the drgital display.
NOTE: After “9 delay hours” is selected, pressing
the DELAY/PAUSE pad again will display the last
selected cycle and options.
4. “DELAY HRS” and the time remaining in hours
will show on the display. When the delay time
ends, the drshwasher will start.
NOTE:
l
You may press the START/FAVORITE pad at
any time during the delay if you want the
dishwasher to start immediately.
l
You may press the CANCEL pad to cancel the
delay and clear the display.
l
You may add items to the load at any time during _
the delay. Close the door firmly to latch it.
The CANCEL pad
The CANCEL pad allows you to cancel a cycle or
selection and drain the dishwasher or clear the
display. If the dishwasher is washing, it will go into
a 2 minute drain automatically before shutting off.
If the dishwasher has not been started or is not
washing, the display will clear.
Using cycle pause
A cycle can be paused at any time for up to
10 minutes.
1. Press the DELAY/PAUSE pad. The cycle will
stop and “PAUSE” will show on the display and
blink. After 10 minutes the cycle will resume
automatically and “PAUSE” will go off.
2. The cycle can be started sooner by pressing the
START/FAVORITE pad.