Filter
Top Products
Operating Instructions
Continued
The beeping sound
l
Each time a control pad is pressed, a single
“beep” sound IS made.
l
A double beep means the wrong control pad has
been pressed.
l
Three beeps sound at the begrnnrng of the
drying part of a cycle.
l
A longer “beep“ sounds at the end of the drying
pan of a cycle If the Heat Dry Option is used.
To turn off the beep:
1. Press and hold the hidden pad until the picture
of the speaker and “OFF” show on the display.
2. Release the pad.
NOTE: A power failure will reset this feature. YOU
will have to repeat the above steps.
To turn on the beep:
1. Press and hold the hidden pad until the picture
of the speaker and “ON” show on the display.
2. Release the pad.
Using a favorite cycle
You can set the dishwasher to remember the cycle
and options you use most often.
To set your favorite cycle for the first time:
1. Press the START/FAVORITE pad or SET
FAVORITE pad.“SET FAVORITE” will show on
the display while the cycle and option names
flash on and off. (This WIII only happen if a favor-
ite cycle has never been set ) After 30 seconds
the display will go out.
8