Filter
Top Products
Using the rotisserie
The rotisserie has 5 parts. It is used with the
Grill Module.
NOTE: Make sure the grill controls are OFF
and the grill is cool before installing
rotisserie.
Motor
j%LLacle TeYinai ,
1.
2.
To install, remove 3. Set in rotisserie
the grills.
rack.
Lift and pull out
the heating
ele-
ment.
To put meat
on spit
1.
2.
3.
4.
Put fork on the spit pointing away from the
handle.
Push spit through meat so the weight is bal-
anced around the center.
Put the second fork on the spit pointing
toward the meat.
Push both forks into the meat and tighten
the thumbscrews.
1.
To remove, slide
2. Lift and pull out
out the side
the heating ele-
baffles.
ment. Note: Make
sure element is
completely cool
10
before removing.
4. Plug in the heat-
ing element.
5. Lift grease well
slightly and slide
side baffles into
place.
6. Install rotisserie
motor as shown.
5. Push the pointed end of the spit all the way
into the motor socket.
6. Put the handle end of the spit into the rack
slot.
7. Plug in and turn on the rotisserie motor. Turn
on the Grill Module. See page 11 for sug-
gested cooking times.
3. Remove motor
4. Plug in the heat-
and rotisserie rack
ing element.
and set aside.
5. Replace grills over
heating element.