Filter
Top Products
Changing cooktop modules
The cooktop modules will work on either side of the cooktop. Make sure all controls
are OFF and the modules are cool before removing them.
Surface unit modules
1.
To remove, lift slightly
by the handle.
Terminal
2. With both hands, pull
module toward you to
unplug it.
3. Lift out and set aside
1.
To replace, line up the
terminal with the
receptacle.
2. Push terminal into place
until it’s plugged in.
Lower the front with the
handle.
Grill module
1. To remove,
lift off grills.
2. Lift heating
element
slightly and
pull toward
you.
3.
Lift out splat-
ter shield.
4. Lift and re-
move the
grease well,
being care-
ful not to sbill
fat dri’p-
pings.
1. To replace,
2.
Put in splat-
lower the
3. Plug heat-
ter shield.
4.
Place grills
grease well
ing element
over heat-
terminal into
into open-
ing element.
ing.
receptacle.
All grill parts must be cleaned after each use to avoid excessive smoke, flare-ups,
8
fat spoilage and odors. See page 14.