Filter
Top Products
’
RIGHT REAR
RIGHT FRbNT
CONTROL KNOB
CONTROL KNOB
Using the surface units
Surface Unit Indicators
The solid dot in the surface unit
indicator shows which surface unit
is turned on by that knob.
Signal light
Control knobs must be pushed in
before turning them to a setting. They
can be set anywhere between HI
and OFF.
One of the signal lights will glow
when a surface unit is on.
Until you get used to the settings, use the following as a guide. For best results,
Start
cooking at the high settings; then turn the control knob down to continue
cooking.
Use HI to start
Use MED-HI Use MED
Use MED-LO
Use LO to
foods cook-
to hold a
for gravy,
to keep food
keep food
ing; to bring
rapid boil; to
puddings
cooking after warm until
liquids to a
fry chicken
and icing; to
starting it
ready to
boil.
or pancakes.
cook large
on a higher
serve. Set the
amounts of
setting. heat higher
vegetables.
or lower
CAUTION: The use of the HI sefflng for long periods of time
’ within the LO
can damage surface units and discolor chrome trim rings.
band to keep
Start cooking on HI and turn control down to continue
food at the
cooklng.
temperature
you want. 5