Filter
Top Products
48
Before setting the controls
• Make sure clock is set to
correct time of day. The clock
cannot be set during the Self-
Cleaning cycle.
Setting the controls
NOTE: These examples are for double
upper ovens only. Other ovens may look
slightly different.
To start cleaning immediately:
1. Press Clean pad.
A 3
1
⁄2-hour Self-Cleaning cycle will be
set. (The first 3 hours are for cleaning,
the last 30 minutes are for cooling.)
NOTE: On double ovens, the cavity
symbol flashes to tell you which oven you
are setting. The electronic control will
not let both ovens be active while one
oven is cleaning.
2. Set cleaning time (optional).
If you want a Self-Cleaning cycle other
than 3
1
⁄2 hours, press the desired
Number pads for the new time from
2
1
⁄2 to 4
1
⁄2 hours.
• Use 2
1
⁄2 hours for light soil.
• Use 3
1
⁄2-4
1
⁄2 hours for moderate
to heavy soil.
• Make sure the oven door is
completely closed.
PRESS YOU SEE
ON
NIGHT LIGHT
DELAY
SET
RAISING
BREAD
DEHYDRATE
COOK TEMP CLEAN TIME
STANDARDENTER
PROBE TEMP TIME
START
TIME
STOP
START
LOCK
?LOCKED
CONTROL
DOOR
AT
(stop time display shows time
3
1
⁄2 hours later than time of day –
shown in start time display)
Using the Self-Cleaning Cycle
4
0
0
PRESS YOU SEE
ON
NIGHT LIGHT
DELAY
SET
RAISING
BREAD
DEHYDRATE
COOK TEMP CLEAN TIME
STANDARDENTER
PROBE TEMP TIME
START
TIME
STOP
START
LOCK
?LOCKED
CONTROL
DOOR
AT
(example shows 4-hour cleaning
cycle with stop time now 4 hours
later than time of day)
PRESS
CLEAN
to select
oven (for
double
ovens)