Filter
Top Products
Using AUTO TEMPICOMBO
AUTO TEMPXOMBO provides a short-cut method for setting commonly used convection microwave
combination probe temperature settings. This cycle includes preset cooking temperatures and micro-
wave cook power settings, plus nine preset probe temperature settings (IIO’F-190°F). It is preset to
cook at 350°F (unless another cooking temperature has been selected.) Once the selected cooking
temperature has been reached, the oven maintains that temperature while it adds 10% or selected
microwave Cook Power. AUTO TEMPXOMBO can be used with AUTO START, QUICK DEFROST and KEEP
WARM. It can also be set to follow a microwave only cooking cycle.
The oven does not preheat in this cycle.
DO THIS...
1.
Insert at least Y3 of the
temperature probe into
the food.
2. Place food in the oven and
plug the probe into the socket
in the top of the oven cavity
DO THIS...
THIS HAPPENS...
4.
Touch AUTO TEMPICOMBO.
5. Touch the Number Pad (l-9)
for the desired final
temperature (IlO”-190°F).
3. Make sure the probe
does not touch any part
of the oven Interior.
Close the door.
The COMBO and PROBE TEMP Indicator
Lights will come on and the Display
will show “F.”
The Display will show the temperature
you selected. This example shows you
touched Number 4 for a final cooked
temperature of 140°F
NOTE: The oven will automatically cook at the
preset
temperature of 350°F with 10% microwave
cook power. If a different cooking temperature or microwave cook power is desired, see
“Changing settings” on page 33.