Filter
Top Products
The oven light
Electrical Shock Hazard
Disconnect power before removlng
vent cover.
Replace all panels before operating.
Failure to do so can result In death
or electrical shock.
1. Turn off power at the main power supply.
2. Remove the vent cover mounting
screws.
3. Tlp the cover forward, then lift out to
remove.
4. Remove bulb holder mounting screw.
5. LIR up the bulb holder.
6. We recommend replacing the bulb with a
candelabra-base 30-watt bulb available
from your authorized Whirlpool service
company, or by calling the Consumer
Assistance Center at 1-866-253-l 301.
Make sure to have your model number
when ordering.
7. Replace the bulb holder and mounting
screw.
8. Slide the top of the vent cover into place.
Push the bottom until it snaps into place.
Replace the mounting screws. Turn the
power back on at the main power supply.
49