Filter
Top Products
Setting the clock
When the oven is first plugged in, the Display
flashes “88:88”. If the eiectric power ever goes
off, the Display will again flash all 6’s when the
power comes back on.
You can cook without setting the clock, but the
Display will not show the correct time of day after
cooking. To set the correct time of day, follow
these steps:
1. Touch STOP/CLEAR and the Display will
show “1 :OO”. Then touch AUTO START/
CLOCK and the Display will show a
"0".
2. Touch Number Pads for the correct time of
day. The Display will show the numbers you
touched in the order you touched them. This
example shows 25 minutes after 3 o’clock.
3. Touch AUTO START/CLOCK. The Clock is
set.
If you have touched in an incorrect time,
such as 12:65, “ERROR” will show on the
Display. Touch STOP/CLEAR, then touch
AUTO START/CLOCK and start over.
NOTE: To reset the clock, touch AUTO START/
CLOCK. A “0” will show on the Display. Continue
to set the clock as shown above.
Using the Minute Timer
Your microwave oven can be used as a kitchen
timer. Use the Minute Timer for timing up to
99 minutes, 99 seconds.
Touch Number Pads for the minutes and
seconds you want. The Display will show
the numbers you touched in the order
you touched them. This example shows
3 minutes.
Touch TIMER/PAUSE. The Display will count
down to show you how much time is left.
During the countdown the oven will be dark
and the fan will be off.
When the set time ends, a long tone will
sound. “END” will flash on the Display. Touch
STOP/CLEAR or open the oven door to clear
the Display. The Display will then show the
time of day.
NOTES:
l
To see the time of day while the Minute Timer is
counting down, touch AUTO START/CLOCK.
l
If you want to use other Command Pads while
the Minute Timer is counting down, touch
STOP/CLEAR to cancel the Minute Timer.
11