Filter
Top Products
TEMPERATURE PROBEECONTINUED
CHANGING THE TEMPERATURE SETTING
l
When using the Temperature Probe, COOK TEMP can be changed before or during
operation:
-Touch COOK TEMP.
-Touch number for new temperature.
-Touch START. The oven will continue cooking to the new temperature. If the new
temperature is lower than the temperature of the food, the oven will shut
off.
HINTS FOR USING THE TEMPERATURE PROBE
DO...
l
use hot pads when removing probe from
food or food from oven.
l
stir foods during cooking when
recommended
l
stir soups, casseroles and drinks before
serving.
l
cover roasts with foil and let stand a few
minutes after cooking.
Remove foil if you decide to cook it
longer.
DON’T...
l
let probe or probe cable touch any part
of the oven interior.
l
let probe touch foil [if used). Foil can be
kept away from probe with wooden
toothpicks. Remove foil if arcing occurs.
0 use paper, plastic wrap or or plastic con-
tainers. They will be in the oven too long.
l
use probe in regular oven.
l
force probe into frozen food.
l
use probe for foods that need to simmer.
CLEANING THE PROBE:
1. Remove probe from microwave oven using hot pads.
2. Wipe probe with a hot sudsy cloth. Use a plastic scouring pad to remove stubborn foods.
3. Probe may be placed in the silverware basket of the dishwasher.
4. Be careful not to kink the cable.
NOTE: Make sure you have the right probe for your oven. It will have “HI-Z” on the handle.
DELAYED START
The microwave oven can be set to start automatically when you are not at home.
Use COOK CYCLE 1 at “0” Cook Power to delay the start of COOK CYCLE 2 for up to 99
minutes, 99 seconds.
DO THIS...
THIS HAPPENS...
1.
Put in food and close
the door. See CAUTION
below.
•l3
. .
2.
Touch COOK CYCLE 1.
The COOK CYCLE 1 Signal Light will come
on and the Display will show four O’s
3. Touch number pads for
the length of delay you
18
want.
The Display will show the numbers you
touched
in the order you touched them.
This example shows 60 minutes, (1 hour).