Filter
Top Products
count
The Display counts down the time to show
d
own
how much cooking time is left in the first
cycle.
When the cooking time ends you will hear
4 beeps. (You can stop the beeping by
opening the oven door ortouching CAN-
CEL.) When the beeping stops, the Display
will show the time of day.
CHANGING THE COOKING TIME
You can change the cooking time anytime during the cycle:
1. Touch COOK CYCLE 1.
2. Touch numbers for new time.
3. Touch START.
COOK CYCLE 1 will continue cooking for the new time.
LOWER COOK POWERS
For best results, some recipes call for lower Cook Powers. Lowering the Cook Power
slows the cooking. The lower the Cook Power, the slower the cooking. Each Number
Pad on your microwave oven stands for a different percentage of Cook Power. Many
recipes in your MICRO MENUS- Cookbook tell you, by number, which Cook Power to
use. Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.) or
by percentage (1 O%, 50%, 80%, etc.).
The following chart gives you the percentage of Cook Power each Number Pad
stands for, and the Cook Power name usually used
automatic 100% of full power HIGH
4 40% of full power
9 = 90% of full power
3 30% of full power MED-LO
8 80% of full power
2 ~ 20% of full power
7 70% of full power MED-HI
1 em 10% of full power LO
6 = 60% of full power
0 ~ no power [fan and
5
50% of full power MED
light will be off 1
Tmk.
DO THIS...
THIS HAPPENS...
1.
Put food in the oven and
close the door.
The COOK CYCLE 1 Signal Light will come
on and the Display will show four 0’s.
The Display will show the numbers you
touched in the order you touched them.
This example shows 7 minutes, 30 seconds.
3. Touch Number Pads for
the cooking time you
want.
The COOK POWER Signal Light will come on
and the Display will show two 0’s.
4.
Touch COOK POWER.
CONTINUED NEXT PAGE
7