Filter
Top Products
CHANGING OR ADDING.. CONTINUED
l
PAUSE can be added only if both COOK CYCLE 1 and 2 are used, and then only
before COOK CYCLE 1 ends.
- Touch PAUSE.
- Touch START.
- The oven will stop after COOK CYCLE 1.
- Stir, turn or add ingredients.
- Touch START to continue with COOK CYCLE 2.
l
Cooking time can be changed at any time during either cooking cycle:
- Touch the Cook Cycle you wish to change (COOK CYCLE 1 or 2).
- Touch numbers for the new time.
- Touch START.
- The cycle will cook at the original Cook Power for the new time.
l
Cook Power can be changed at any time during either cooking cycle, or COOK TEMP:
-
Touch the Cook Cycle you wish to change (COOK CYCLE 1 or 2).
- Touch COOK POWER if you want to change to a Cook Power other than high.
- Touch a number for the new Cook Power.
- Touch START. The cycle will cook at the new Cook Power for the original time.
OR...
- Touch COOK POWER twice if you want to change a lower Cook Power to high.
- Touch START.
l
COOK CYCLE 2 can be added at any time before COOK CYCLE 1 ends:
- Touch COOK CYCLE 2.
- Touch numbers for desired cooking time.
- Touch COOK POWER, if a Cook Power other than high is desired.
- Touch a number for the Cook Power.
- Touch START. COOK CYCLE 2 will automaticaly follow COOK CYCLE 1.
l
When using the Temperature Probe, COOK TEMP can be changed during
operation:
- Touch COOK TEMP
- Touch number for new temperature.
- Touch START. The oven will continue cooking to the new temperature. If the new
temperature is lower than the temperature of the food, the oven will shut off.
l
COOK CYCLE 1 or 2 can be added anytime while QUICK DEFROST is operating:
- Touch COOK CYCLE 1 or 2.
- Touch in time and Cook Power instructions.
- Touch START.
Standing time occurs between QUICK DEFROST and COOK CYCLE 1, not
between QUICK DEFROST and COOK CYCLE 2.
CANCELLING INSTRUCTIONS
l
Opening the oven door during cooking does not cancel cooking instructions.
l
KEEP WARM is cancelled when the oven door is opened. If KEEP WARM is cancelled:
1. Touch KEEP WARM.
2. Touch START.
l
To cancel the Minute Imer:
- Touch MINUTE TIMER.
- Touch CANCEL.
l
Touch CANCEL to erase all instructions or beeps.
PROGRAMMING TONE
Each time you touch a pad you will hear a tone. If you do not hear a tone, it is
because the instruction is not correct, or it is because the tones have been removed,
EXAMPLE:
If you forget to plug in the Temperature Probe and touch COOK TEMP. You will not hear
a tone. The instruction is not correct.
It you want to remove the tone:
l
Touch CANCEL twice.
20