Filter
Top Products
The oven light
To turn the light on, use the Oven Light
Switch on the control panel.
Electrical Shock and
Personal Injury Hazard
l Make sure oven and light bulb are
cool and power to the oven has been
turned off before replacing the light
bulb. Failure to do so could result in
electrical shock or burns.
*The bulb cover must be in place
when using the oven. The cover
protects the bulb from breaking, and
from high oven temperatures. Be-
cause bulb cover is made of glass, be
careful not to drop it. Broken glass
could cause injury.
To replace the oven light:
1. Turn off power at the main power supply.
2. Remove the glass bulb cover in the back
of the oven by screwing it out counter-
clockwise.
3. Remove the light bulb from its socket.
Replace the bulb with a 40-watt appli-
ance bulb.
4. Replace the bulb cover by screwing it in
clockwise. Turn on power at the main
power supply.
NOTE: Do not use the oven light during the
Self-Cleaning cycle. Use during the Self-
Cleaning cycle will shorten the life of the
bulb.
24