Setting the Controls
Be sun? the kitchen is ventilated during the Self-Cleaning cycle. This will
help normal smoke and heat to disappear from the room as quickly as
possible.
1.
Set the Upper Oven Selector and
Upper Oven Temperature Control
on CLEAN. The Upper Oven “on”
Signal Light will come on.
2. Lift the panel between the oven
door and the control panel. Move
the Lock Lever
all the way to the
right.
3. Push in and release the Self-Clean
Button. A 3-hour Self-Cleanrng
cycle will be set automatically.
The Display will count down the
time in minutes. The Auto Oven
Symbol, Self-Clean and “heating”
Signal Lights will come on.
If a cleaning cycle other than 3
hours is desired,
push in and hold
the Bake Hours Button and turn
the Set Knob to the new time up to
4 hours.
l
Use 2 hours for light soil.
l
Use 3-4 hours for moderate to
heavy soil.
4. The “locked” Signal Light will
come on when the upper oven
temperature exceeds normal
baking temperatures. The Lock
Lever must not be moved and the
door can’t be opened when the
light is on.
if you want to see Stop
Time of the Self-Cleaning cycle,
push the Stop Time Button. Push the
Self-Clean Button to see cleaning
time again.
NOTE: The Bake Hours and Stop
Time Signal lights will flash
during the entire Self-Cleaning
cycle.
5. After the cleaning cycle is com-
pleted,
the Auto Oven Symbol
and Self-Clean Signal Light will go
off. The Display will show the time
of day. When the “locked” Signal
Light goes off, move the Lock Lever
back to the left.
Do not force it.
Wait until it will move easily.
continued on next page
19