The anti-tip bracket
The range will not tip during normal use. However, tipping can occur if you apply too much
force or weight to the open door without the anti-tip bracket properly secured.
Personal injury Hazard
l
To reduce risk of range tipping over, secure range with a properly
installed anti-tip bracket supplied with range or an optional wall-
mounted anti-tip bracket kit.
l
If range is moved for cleaning or service, check that anti-tip device
is engaged before using range.
Failure to follow the above precautions could result in personal injury.
To verify the anti-tip bracket is
engaged (if you have 81 floor
bracket):
l
Remove
the storage drawer. (See page
18.)
l
Look
to see if the anti-tip bracket is attached
to floor with screws.
l
Make
sure
one rear leveling leg is positioned
under the anti-tip bracket.
l
SW Installation Instructions for further details.
To verify the anti-tip bracket is
engaged (if you have a wall
bracket):
l
Look
to see if the anti-tip bracket is attached
with screws to the wall behind the control
panel.
l
Make
sure
the cable on the back of the range
is secured by the two hooks on the bracket.
l
Cable
must be unhooked from wall bracket to
move range for cleaning or service. Recon-
nect cable before using range.
l
See Installation Instructions for further details.
Rear
leveling
leg
Wall bracket
Optional door panel pat
If you would like to change the color of your
oven door glass to white or almond, you can
order one of these kits from your Whirlpool
Dealer. The kits include easy installation
instructions.
Models RF370PXY and RF365PXY:
l
White
(Kit No. 814069)
l
Almond
(Kit No. 814070)
Model RF360BXY:
l
White (Kii No.
814071)
l
Almond
(Kit No. 814072)
19