Filter
Top Products
3. Pull the surface unit straight away from
the receptacle.
4. Lift out the reflector bowl. On Model
RF365PXY, Q series, also lift out the
trim ring. See Ueaning chart” on pages
26 and 27 for cleaning instructions.
Replacing
1. Make sure all surface units are off and
cool before replacing surface units and
reflector bowls.
2. Line up openings in the reflector bowl
and (Model RF365PXY. Q series)
notches in the trim ring with the surface
unit receptacle and the element hold-
down clip.
3. Hold the surface unit as level as possible
with the terminal just started into the
receptacle. Push the surface unit terminal
into the receptacle.
(Model RF365PXY. Q series, shown)
.b
9
(Model RF365PXY, Q series, shown)
24