Whirlpool RF370PXY Range User Manual


 
4. Move the Lock Lever to the right-the
Clean position. The OVEN HEATING
Indicator Light will come on.
5. When the oven temperature goes
above normal baking/roasting tem-
peratures,
the door cannot be opened
and the Lock Lever must not be moved.
6. After the Self-Cleaning
cyclle
Is com-
pleted and the oven has cooled suffi-
ciently,
the Lock Lever can be moved
back to the
left. DO NOT FORCE IT. Wait
until
it moves easily. Turn the Oven
Selector and Oven Temperature Control
Knob to OFF.
7.
After the oven Is cool, wipe off
any
residue or ash with a damp cloth. If
needed,
touch up spots with a
soapy
steel-wool pad.
To stop the Self-Cleaniing
cycle at any time:
1. Push In
and
turn
the Stop Time Knob
clockwise until it points to thle correct time
of day.
2. Turn the Oven Selector and
Cven
Temperature Control Knob toI OFF. When
the oven has cooled suffiiientfy, move
the Lock Lever back to the left.
DO NOT
FORCE IT. Wait
until it moves easily.
Special tips
l
Keep
the kitchen well ventilated during the
l
If the Self-Cleaning cycle does not get
the
Seff-Cleaning cycle to help gelt rid of heat,
oven as clean as you expected, the cycle
odors and smoke.
may not have been set long enough or you
l
After the oven is cool,
wipe
top
any residue
may not have prepared the oven properly.
or ash with a damp cloth or sponge. If any
Set the Self-Cleaning cycle longer the next
spots remain, clean with a mild abrasive
time and hand-clean areas noted on
cleanser or cleaning sponge.
page 20.
l
Clean
the oven
before
it gets heavily soiled.
Cleaning a very soiled oven takes longer and
resufts in more smoke than usual.
22