Filter
Top Products
To cancel the Minute Timer:
Press Timer Off pad.
PRESS
YOU SEE
(time of
day)
Starting a function
After programming a function, you must press
the Start/Enter pad to start the
function. If you do not press the
Start/Enter pad within 5 seconds of
programming, “START?” will show
on the display as a reminder.
Canceling a function
The Off/Cancel pad will cancel any function
except for the Clock and Timer Set
functions. When you press the Off/
Cancel pad, the display will show the
time of day or, if Minute Timer is also
being used, the time remaining.
Audible signals
Audible signals tell you if a function is entered
correctly or not. They also tell you when a
cycle is completed.
To shut off all signals except for the
end-of-timer and error tones:
Press and hold the Stop Time pad for 5 sec-
D
onds. A short tone will sound to tell
sTop you the signals have been changed.
TIME
Repeat the above step to turn the
signals back on.
To choose between high and low volume
signals:
Press and hold the Delay Start Time pad for
5 seconds. A short tone will sound
to tell you the signals have been
changed. Either “HI” or “LO” will
appear on the time display to show
the volume you chose.
15