Filter
Top Products
Command pads
The command pads tell the oven what to do and
in what order. A few examples:
-Clock/Set tells the oven you are going to set the
clock
-Off/Cancel tells the oven to turn off.
Each command pad (except Off/Cancel and
Start/Enter) has its own indicator. The indicator
comes on when you touch the command pad.
Setting the clock
1. Push the Clock/Set pad. The colon flashes
and TIME will light up in the display.
2. Use the Hour and Minute pads to set the time
of day. Push the “up” (A) or “down” (V) pad(s)
until the correct time shows in the display.
3. Push the Start/Enter pad.
NOTE: If you do not want the clock time displayed,
push and hold the Clock/Set pad for 4 seconds.
To display the clock time again, push the Clock/Set
pad once.
CLOCK
m
Using the electronic Minute Timer
The Minute Timer does not start or stop the oven.
It works like a kitchen timer. lt can be set in hours
and minutes up to 11 hours, 59 minutes. The
Minute Timer will display minutes and seconds
for settings under one hour. You will hear four
1 -second tones when the set time is up.
1. Push the Timer Set pad. TIMER will come on
and the display will show “0:OO” with the colon
flashing.