Filter
Top Products
4. Lift out the reflector bowl. For model
RF385PXY, Q series, also lift out the trim ring.
See “Cleaning other range parts” on page 35
for cleaning instructions.
Replacing
1. Make sure all control knobs are turned off and
cool before replacing surface units and
reflector bowls.
2. Line up openings in the reflector bowl and (on
RF385PXY, Q series) notches in the trim ring
with the surface unit receptacle and the
element hold-down clip.
3. Hold the surface unit as level as possible with
the terminal just started into the receptacle.
Push the surface unit terminal into the
receptacle.
(Model RF385PXY, Q series, shown)
(Model RF385PXY, 0 series, shown)
33