Whirlpool RF385PXY Range User Manual


 
PROBLEM
Cooking results
are not what
you expected
The display
shows “PF”
POSSIBLE CAUSE
SOLUTION
The range is not level.
Level range. (See Installation Instruc-
tions.)
The oven temperature seems too
Adjust the oven temperature control.
low or too high.
(See “Adjusting the oven temperature
control” on page 14.)
The oven was not preheated
Preheat oven when called for in recipe.
before baking.
The recipe has never been
Use only tested recipes from a reliable
tested or is not from a reliable
source.
source.
The pan used is not the type or
Refer to a reliable cookbook for recom-
size recommended in the recipe.
mended pan type and size.
There is not proper air circulation
Allow 1 l/2 to 2 inches (4-5 cm) of air space
around pan when baking.
on all sides of pan.
Cooking utensil does not fit the
Pan should be the same size or slightly
surface unit being used.
larger than surface unit being used.
There has been a power failure.
Reset the clock. (See page 11.)
“Fl” or “F3”
shows In the
display
Call for service. (See Step 3 on page 39.)
38