Filter
Top Products
(Cooking in More Than One Cycie...contlnued)
q
A
Touch Number For
Cooking Power
9. Touch in the Cooklng Power. For this example, we called for 40%
cooking power in Cycle 2. Touch NUMBER PAD 4. The DISPLAY will show
40
Display Shows 40%
Cooking Power
NOTE: You hove now touched In instructions for both Cycle 1 ond
Cycle 2. If you didn’t wont or need o third Cycle, you could touch
START.
Touch
Cycle
3
10.
Touch COOKING CYCLE
3. Now all 3 Cycle INDICATORS will be on;
the DISPLAY WIII show 4 zeros and the Cook Power INDICATOR will go off.
Touch Number Pads In Order
Il.
Touch in Cooking Time
for
Cycle 3.
Cycle 3, in this example, is to
have 1% minutes. Touch NUMBER PADS I,3 and 0. The display will show
I:30
Display Shows Selected lime
louch
The Cook
Power
12. Touch the COOK POWER Pad.
The Cook Power INDICATOR will come
on and the DISPLAY ~111 show 2 zeros. The microwave oven IS ready for you to
touch In Cook Power for Cycle 3
Display Shows Cook
Power Can Be Set
Touch Number For
Cooking Power
Display Shows 50%
Cooking Power
13. Touch in the Cooking Power.
For 50% Cooking Power, touch NUM-
BER PAD 5. The DISPLAY will show 50.
14. Touch START Pad.You
have just completed programming Your
microwave oven to cook at different levels for different times in 3
cycles. When You touch the START pad, the oven will begin with Cycle
1, proceed through Cycle 2 and finish with Cycle 3. NOTE: You can
touch the COOKING CYCLE pads in any order, but the microwave oven
will automatically operate in l-2-3 order [or in Defrost-l-2-3 order]
WHAT TO EXPECT. Your mlcrowove oven will start with the Instructions
you gave It for Cycle 1.. It will cook for V/Z minutes at 50% power.
While It Is doing that, the Cook Power and Cycle 1 INDICATORS will be
on. The DISPLAY will show o countdown of the time remaining In
Cycle 1. For 2 seconds out of every 10, the Cook Power level you
selected (50) wlii show on the DISPLAY.