Filter
Top Products
(Cooking in More Than One Cycle...continued)
1.
Put Food in the Microwave Oven and Shut the Door.
Touch
Cycle 1
2. Touch COOKING CYCLE 1.
The Cycle 1 INDICATOR WIII glow and 4
zeros WIII show on the DISPLAY These indtcators tell you that the mlcrowave
oven IS ready for your next Instruction
3. Touch in Cooking Time tor Cycle 1.
Touch NUMBER PADS 1, 3 and 0
for 1’ 2 minutes of time The DISPLAY will show what numbers you touched.
Touch Number Pads In Order
Display Shows Selected lime
Touch
Cook
Power
4. Touch the COOK POWER Pad.
When you touch the COOK POWER
pad the DISPLAY will show 2 zeros The microwave oven is now ready
for you to tell it what cooking power you want.
Display Shows Cook Power
Can Be Set
Touch Number For
Cooking Power
5. Touch in the Cooking Power.
The number you touch will tell the
mlcrowave oven how much of full power you want. In this example, we
want
50%, so you touch NUMBER PAD 5. The DISPLAY will show 50
m
Display Shows 50%
Cooking Power
NOTE: You’ve just completed exactly what you did to touch in Cook-
ing in One Cycle at a Selected Cook Power (page 8). Now, instead
ot touching the START Pad, you go on by touching in Cycle 2.
q
6.
Touch COOKING CYCLE
2. Now the Cycle 2 INDICATOR wtll glow and
Touch
the DISPLAY will show 4 zeros. The Cycle 1 INDICATOR will stay on (to show
Cycle 2
that you have touched in Cycle 1 instructions), but the Cook Power
INDICATOR will go off
7. Touch In Cooking Time for Cycle 2. For this example, Cycle 2 IS to
have 2 minutes. Touch NUMBER PADS 2. 0 and 0. The DISPLAY will show
Touch Number
Pads In Order
2:00...letting You know that You did it right.
Display Shows Selected
lime
Touch
Cook
Power
8.
Touch the COOK POWER Pad.
When you touch the COOK POWER
pad. the Cook Power INDICATOR glows and the DISPLAY shows 2 zeros. The
mlcrowave oven
IS
now ready for you to touch in the cooking power you
want for Cycle 2.
Display Shows Cook
Power Can Be Sel
9