Filter
Top Products
Other Handy Operating Hints
There are CI number of things you can do with your mtcrowave oven
Some we ve already covered. but are worth repeatrng. others wrll be
mentioned for the ftrst trme All can help you enjoy usrng your Whrrlpool
Mrcrowave Oven
To Recall What You Have Set
There may be a trme you want to double-check ,whut you touched
In for Cycle 3 whrle your oven IS cooking in Cycle 1 Just touch the
Command Pad for the setting you want to check In this case. touch
Cycle 3 The DISPLAY
will
tell you how much time, In mrnutej and
seconds you touched In for that cycle If you want lo know the cookrng
power you touched in. touch the COOK POWER pad
To Change or Cancel Instructions
If you need to change instructrons after touchrng the START pad.
touch the CANCEL pad All instructrons
will
be cancelled Touch in new
rnstructions
To change instructions before touching the START pad. just touch in
the new instructions For example, if you are touching in instructions for
Cycle3 and you decide to change Cycle 2, finish Cycle 3 instructions.
Then touch in new Cycle 2 Instructions. The second set of instructions
for Cycle 2 will erase the first set It makes no difference
of you
touch in
Cycle 3 first, Cycle 1 second and Cycle 2 third. Your microwave oven
will cook in l-2-3 order
To Change or Cancel the Minute Timer
Touch the MINUTE TIMER Command Pad Touch NUMBER PAD 0 to
cancel the time, or touch NUMBER PADS lo change the time. Then touch
either CLOCK (if you cancelled the Minute Timer) or START (if you want
a new time entered).
If you want to stop the microwave oven from cooking,
open the
q
To Stop Cooking
. .
door.
Instructions you touched in will not be erased. You can also
touch
the CANCEL pad.
The CANCEL pad erases all instructions.
To Restart the Oven
If You stopped the oven by opening the door. close the door securely
and touch the START Command Pad. If you stopped the oven with the
CANCEL Command Pad, You must touch in new instructions before
touching the START Command Pad.
Reminders
l
If you touch two instructions into the
same cycle,
the second in-
struction will erase the first. This allows You to change instructions
easily.
l
When cooking at a cook power (other than HIGH], the number for
the selected power level will be displayed for 2 seconds during
every 10 seconds of cooking time.
l
When you program the microwave oven to follow the DEFROST
Cycle with Cycle 1, the oven will automatically put a holding (stand-
ing time) between the two cycles,
l
When You program the microwave oven to follow the DEFROST
Cycle with Cycle 2 or 3, there will be no Hold (standing time] after
the DEFROST Cycle.
l
With the Safety Switch (page 4) ON, the CLOCK and MINUTE TIMER
can be set only if the door is closed. With the switch OFF, the CLOCK
and MINUTE TIMER can be set with the door open or closed.
16