Filter
Top Products
Using SENSOR COOK
Cooking with SENSOR COOK takes the
guesswork out of microwave cooking. The
microwave oven automatically adjusts
cooking times and powers by detecting the
moisture and humidity emitted by the food as
it heats.
1. Put food in oven and close the door.
2. Touch SENSOR COOK. The SENSOR
Indicator will come on and “FOOD” will
show on the Display.
3. Choose a Sensor Cook setting by touch-
ing the appropriate Number Pad. (See the
Cook Guide label on the frame behind the
oven door for setting information.)
NOTE: If you touch the wrong Sensor
setting, touch the correct setting. The
chosen setting will appear on the Display.
4. Touch START/ENTER. The sensor now
detects the moisture and humidity emitted
by the food.
NOTE: Do not open the door or touch
OFF/CANCEL during this part of the
cooking cycle. The measurement will be
interrupted.
If “ERROR” appears on the Display
before cooking starts, touch OFWCAN-
CEL and start over. If “ERROR” appears
after cooking has started, touch OFF/
CANCEL and continue cooking using a
timed cycle. See page 15 or 16.
5. When the Display shows the remaining
cooking time, you can open the door to
stir or season the food.
NOTE: Before using SENSOR COOK, be
sure the Display is blank. lf the Display is
not blank, touch OFF/CANCEL once or
twice.
24