Filter
Top Products
Using Your Range
Continued
To replace modules:
1. Line up module terminal with
cooktop receptacle.
2. Push terminal into receptacle until it
is plugged in.
3. Use the handle to lower the front of
the module.
Setting the electronic clock
The electronic clock is a digital clock
with a Minute Timer and automatic
control cooking cycle. Time-of-day,
Minute Timer times and cook times are
set by pushing command buttons on
either side of the display.
When the range is connected to
power, or a power failure longer than
three seconds occurs, “12:OO” will
flash on the display.
Push the Cancel/Clock button.
Set the desired time by pushing the
Up and Down buttons. The time will
increase or decrease on the display,
depending upon which button you
push. “PM” will appear on the display
for a PM time setting.
Setting the electronic
Minute Timer
The Minute Timer does not start or stop
the oven. It works like a kitchen timer. It
can be set in hours and minutes up to 9
hours 59 minutes. When the set time is
up, you will hear a l/2-second on and
1Esecond off tone and the lower dot in
the middle of the display will flash.
Press the Minute Timer button to cancel
the tone and flashing dot.
1. Push the Minute Timer button.
2. Set the desired time by pushing the
Up and Down buttons, The time will
increase or decrease on the display,
depending upon which button you
push. The lower dot in the middle of
the display will light up, indicating
that the Minute Timer is on.
12