Filter
Top Products
Caring For Your Range
Burn and Electrical Shock Hazard
Make sure all controls are off and
the range is cool before cleaning.
Failure to do so can result in
burns or electrical shock.
Control panel and knobs
1. Turn control knobs to the OFF
position.
2. Pull control knobs straight off
3. Use warm soapy water or spray
glass cleaner and a soft cloth to wipe
the control panel. Rinse and wipe
dry with a soft cloth.
4. Wash control knobs in warm soapy
water. Rinse well and dry with a soft
cloth. Do not soak.
5. Replace control knobs by pushing
them firmly into place.
NOTE: When cleaning, never use steel
wool, abrasives, or commercial oven
cleaners which may damage the finish.
After cleaning, make sure all control
knobs point to the OFF position.
Coil surface units and
reflector bowls
Removing
Burn and Electrical Shock Hazard
Make sure all surface units are
OFF before removing surface
units and reflector bowls. Failure
to do so can result in burns or
electrical shock.
1. Lift the edge of the unit opposite the
receptacle, just enough to clear the
reflector bowl.
2. Pull the surface unit straight away
from the receptacle.
21