Filter
Top Products
Caring For Your Range
Continued
Ven\cover
Filler
5.
Replace the vent cover.
1.
Remove the vent cover and wash in
warm, soapy water or wipe with a
damp cloth. Do not use metal
scrubbing pads or abrasive
cleansers.
Lift up vent filter, which is directly
below vent cover. Wash in warm,
soapy water or dishwasher.
Wipe in and around the vent box
with a damp cloth. Spills should be
cleaned up with a sponge.
Replace the filter. Be sure the filter is
replaced flat and rests on side edges
of trim. Filter should not be replaced
at an angle.
NOTE: Filter must be in olace for the
fan to operate properly. Replacement
filters can be ordered from a
WhirlpoolSM service company or dealer.
Order Part Number 786220 (one pair).
In the event you are unable to obtain
the name of a local authorized
Whirlpool service company, call
Whirlpool COOL-LINE” service
assistance, TOLL-FREE 1-800-253-
1301.
Under normal use, the vent fan
requires no oiling for the first year. After
the first year, oil every three months
with SAE 20 oil.
28