Filter
Top Products
Caring For Your Range
Continued
3.
Lift out the reflector bowl. See
“Cleaning tips” on page 34 for
cleaning instructions.
Replacing
Burn, Electrical Shock and Fire
Hazard
l
Make sure all surface units are
OFF before replacing surface
units and reflector bowls. Failure
to do so can result in burns or
electrical shock.
l
Do not line the reflector bowls
with foil. Fire or electrical shock
could result.
Line up openings in the reflector
bowl with the surface unit receptacle.
Hold the surface unit as level as
possible with the terminal just started
into the receptacle.
While pushing the surface unit
terminal into the receptacle, lift a little
on the edge of the unit nearest the
receptacle.
When the terminal is pushed into the
receptacle as far as it will go, the
surface unit will fit into the reflector
bowl.
Reflector bowls reflect heat back to the
utensils on the surface units. They also
help catch spills. When they are kept
clean, they reflect heat better and look
new longer.
22