Filter
Top Products
4. Lift and remove the grease well and
grease pan, being careful not to
spill fat drippings.
Wash grill sections with warm, soapy
water and a non-abrasive plastic
scrubbing pad. Rinse and wipe dry. Do
not use metal scrubbing pads or
abrasive cleansers. They will
scratch the non-stick finish.
Wash the splatter shield, grease well
and grease pan in warm, soapy water.
Use a plastic scrubbing pad for
heavily- soiled areas. Rinse and wipe
dry. The grease well and grease pan
may be cleaned in a dishwasher.
To replace grill:
1. Lower the grease pan and the
grease well into opening.
2. Put in splatter shield.
3. Plug heating element terminal into
receptacle.
4. Place grill sections over heating
element.
Vent system
Personal Injury Hazard
l
Disconnect the electrical
supply before servicing the
cooktop. The wall receptacle is
located in the cabinet beneath
the cooktop.
l
Turn fan and cooktop controls
to OFF before cleaning the vent
system. The vent fan system
turns on automatically when
the grill is used. Do not put
hand in vent box when fan or
controls are on.
Failure to follow these instruc-
tions could result in personal
injury.
27