Filter
Top Products
Using Your Range
Using the surface burners
Control knob0 must be pushed Irr, then turned
to the LITE fxuiitii. The cliiing riourKl is the
ignition sparking.
To stop the clicking sound after the burner
liits. turn the aontrol knob bedc to a desired
setting. The control knob can be set anywhere
between HI and OfF.
Surface burner rnarksm
The solid dot in the surface burner marker shows
which surfaca burner is turned on by that knob.
Unlll you get uti to the ssttlng% w the
followhg as a gufde. For beat resutts. start
cooking at the high settings; then turn the control
knob down to continue cooking.
Upe UlE to light the burner. Aft&v the burner
lights, turn control back to a desired setting to
stop the clicking of the ignttii.
Uw HI to start foods cooking: to bring liquids
to a boil.
Use a rnedlum setting to continue cooking or
to fry chiien or pancakes; for gravy, pudding
and icing; to cook large amounts of vegetables.
Uee a low setilng to keep food warm until
ready to serve.
NOTE: Do not cook with the axltrol in the LITE
position.
In cast3 of a prolonged power failure:
Surface burners can tx manually lighted. Hold a
lighted match near a burner and turn the control
to the LITE position. After the burner lights. turn
the control to the desired setting.
Burn, Fire and Explosion Hazsrd
l
Burner
flame should not extend ayond
the edge of the caoklng utensil. The
flame can burn you and cause poor
cooklng results.
. Be sure all control knoba are turned to
OFF when you are not cookhg. Someone
oould be burned or a flrr could start If a
burner Is accidentally left ON.
l
If the flame should go out while cooklng,
or
If there Is a sfrong gas odor, turn ths
burners OFF. Walt five mlnutss for the
gas odor to dfsappsar, before rellghtlng
burner. If gas odor la still prewnt, sss
safety note on page 3. Failure to follow
thess precautions could reauff In
exploskn or flre.
l
Do not attempt to light the oven burner
durlng a power failure. personal injury
could result.