Filter
Top Products
Setting the clock and timer
The clock/timer acts as both a time-of-
day clock and as a minute timer.
To set time of day:
When the range is connected to power,
the clock display will blink at 88:88 until
the time-of-day is set. To set time-of-day,
depress the Set Button once. The
triangle and clock signal lights on the
display will light up and remain lit until
the time is set. Within 15 seconds, turn
the Clock/Timer Knob to the correct
time.
To set the timer:
Turn the ClocWTimer Knob clockwise to
the desired setting, up to 9 hours 50
minutes. (Knob must be turned four or
five clicks before time will advance.) The
triangle and bell signal lights will light
up. The timer will count down the time
while flashing the time-of-day every 12
seconds. Three beeps will sound at the
end of the set time and the signal lights
will go off.
To cancel the Minute Timer before
the countdown is completed:
Turn the Set Knob to “0:OO.” If no
other time is set within three seconds,
the time-of-day will reappear on the
display.