Filter
Top Products
Clock
Feature Change
When setting the clock or using the Minute Timer, please use the following instructions
instead of those found in your Use and Care Guide.
To check time-of-day when using
Minute Timer:
Push and hold the Set button. The time-
of-day will appear.
Setting the clock
When the range is connected to power,
the clock display will blink at “88:88” until
the time-of-day is set.
1.
Push and hold the Set button while
turning the Set Knob in either direction
to the correct time-of-day.
2. Release the Set button after the time-
of-day is set.
Using the Minute Timer
The Minute Timer does not start or stop
the oven. It works like a kitchen timer. It
can be set in minutes and seconds up to
60 minutes.
Turn the Set Knob clockwise to the
desired setting (up to 60 minutes). The
Minute Timer will count down and the
colon will flash. When the set time is
up, a tone will sound.
Press the Set button. The tone will
stop and the display will show the
time-of-day.
To return to the Minute Timer display:
Release the Set button. The Minute
Timer will continue to count down.
To cancel the Minute Timer before the
countdown is completed:
Turn the Set Knob to “0:OO“. If no other
time is set within three seconds, the time-
of-day will reappear on the display.
Part No 76877-0014362868
01991 Whirlpool Corporation
Printed in U.S.A