Filter
Top Products
-16-
1. Wine Temperature Indicator: A red LED bar will light up when
the thermostat is reading the liquid temperature in the bottle via
the probe. This will remain lit and the temperature you see
displayed is what the probe is reading.
2. LED Screen: Displays your thermostat readings.
3. Wine Temperature Reading: The temperature the water bottle
is registering to the thermostat.
4. Temperature SET Indicator: A red LED bar will light up when
you are setting the temperature.
5. Unit ON Indicator: A red LED bar will light up every time the
unit turns on to run a cooling cycle.
6. SET Button: Used to set the temperature you want the unit to
maintain.
7. UP Arrow Button: Used with the SET button to set temperature
higher. In addition, by pressing and holding the button it will
allow you to see the 5-minute count down.
8. DOWN Arrow Button: Used with the SET button to set
temperature lower.
*Up and Down Arrow Buttons used simultaneously will
change the temperature read out from Fahrenheit to
Celsius*
PDT OPERATING INSTRUCTIONS
WINE Temperature Indicator
Wine Temperature Reading
LED Screen
1
3
2
4
5 6
7
8
Temperature SET Indicator
Button
UP Arrow Button
DOWN Arrow Butto
n
Unit ON Indicator Button
SET Temperature Button
Temperature
Precision digital Technology Thermostat
PDT
WINE
ON
SET
55F
SET
The unit is set at 55°F at the factory. To raise or lower the set
temperature, press the set button while at the same time
pressing either the arrow up or arrow down button.