Filter
Top Products
97-0019-01-01 35
Configuring the Freedom SW using the SCP
Viewing the System Status Screen
The System Status screen displays system activity. The information
appearing on the System screen varies with the status of the
inverter/charger. See “Reading the System Status Screen” on page
29. Go back to “Reading the Freedom SW Device Setup Screen” on
page 30 for an explanation of the different states of the inverter/
charger. For example, Figure 17 shows the Freedom SW in the bulk
stage of charging.
You cannot select or change any of the information on the System
Status screen. If you would like to view more detailed information,
press the Enter button (indicated by the menu arrow) to go to the
Select Device menu.
Viewing the Select Device Menu
The Select Device menu is where you can view a list of all the
Xanbus-enabled devices in your power system.
At least two devices are sure to appear together with System
Settings and Clock – the Freedom SW Inverter/Charger and the
Xanbus SCP. Other devices such as the Xanbus AGS and the
Freedom Sequence Intelligent Power Manager appear only when
they are connected and installed.
Figure 17 Bulk System Screen (Example)
System Status
menu EnInv EnChg Shr
Battery
BatLev
Load
AC In
12.1V -257A 84”F
Invert
120V 10A 12A
0V 0A 0A
Figure 18 Select Device Screen
Select Device
System Settings
FSW3012 00
XAGS 00
XSCP
Freedom SW 3K2K InvChg Owners Guide.book Page 35 Thursday, July 31, 2014 1:42 PM