Zanussi TH 500 Ventilation Hood User Manual


 
10
INSTALLATION INSTRUCTIONS
It is dangerous to alter the specifications or attempt to modify this product in any way.
Technical Information
DIMENSIONS HEIGHT: 38cm
WIDTH 60cm
DEPTH 28cm
DEPTH WITH VISOR OPEN: 45,5cm
WEIGHT GROSS: 14,7kg
NET: 12,7kg
ELECTRICAL SUPPLY: Voltage (50Hz) 220-240 V
POWER CONSUMPTION: 285W
FAN MOTOR: 270W
LAMP: 15W
SUITABLE FOR INSTALLATION
ABOVE: OVER ELECTRIC HOB: 7KW (max)
OVER GAS HOB: 10KW (max)
SLOT-IN GAS OVEN : 13.5KW (max)
SLOT-IN ELECTRIC COOKER: 12.4KW (max)
Note: CE Marking certifies that this appliance complies with the require-
ments laid down in EEC directive 89:336. (Electromagnetic compatibility)
and subsequent modifications and Low Voltage directive 72/23/E.
ELECTRICAL CONNECTIONS
This appliance must be earthed.
Electrical Requirements
Any permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualified
electrician e.g. your local Electricity Board, or a
contractor who is on the role of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).
Electrical Connection
Before connecting to the mains supply ensure
that the mains voltage corresponds to the voltage
on the rating plate inside the cooker hood.
This appliance is fitted with a 3 core mains
cable and must be permanently connected to
the electricity supply via a double-pole switch
having 3mm minimum contact gap on each
pole. A Switched Fuse Connection Unit to
BS.1363 Part 4, fitted with a 3A fuse, is a
recommendad mains supply connection
accessory to ensure compliance with the Safety
Requirements applicable to fixed wiring
instructions.
This appliance conforms to BS.800: 1988 and
EEC Directive No. 78 308 regarding
suppression of radio and television
interference.