Configurator
CP Output Set
5−93CM 4000 Installation and Operating Manual
The CP 3832/64 can be also be operated in connection with an adjacent CP 3810 Expansion Panel. See Figure
5−76.
CP 3832
(Main panel)
CP 3810
1
Output Set — 3832−OUT
1 MONITOR1 MON1 1
2 2 MONITOR2 MON2 2
8 8 VTR−4 VTR4 8
9 9 VTR−5 VTR5 9
PAGE
1
PAGE
2
16 16 VTR−12 VTR12 16
Up to
page 10
†
†
†
†
†
default
default
default
default
default
Figure 5−76. Entries for CP
3810 used as multi−destination
panel. Set is assigned to main
panel on MPK Devices table.
Entry Mnemnonic
Output
Lev Set ButtonCategory
Logical
17. To close the table, click on “OK.”
18. Click on “File > Save” to save the set.
The change will apply to all control panels that use the same Output Set. For the system shown on page 5−107, it would
affect all panels in the system since all of them use “KXYZ−OUT” as the Output Set.
19. Validate, compile, and activate the new configuration set. For more information, refer to page 5−13.
†
Data not used, but entry must be present to satisfy compiler. Each number in this column must be unique.
