A SERVICE OF

logo

Open as PDF
next previous
UPS SETUP
EATON Powerware
®
9355 UPS (10/15 kVA) User’s Guide S 164201594 Rev C www.powerware.com
11
Unloading the Cabinet(s)
The following tools are required for unloading the cabinet(s):
S 15 mm wrench or socket
S 7 mm nut driver or socket
CAUTION
The UPS and EBM a re heavy (see page 10). Unloading the cabinets requires at least two
people to safely remove the cabinets from the pallet.
To unload three-high cabinets or two -high EBMs, continue to the
following section. To unload two-high UPS cabinets, proceed to page 15.
Three-High Cabinets or Two-High EBMs
To remove a three-high cabinet or a two -high EBM from the shipping
pallet:
1. Remove the two M10 bolts securing the stabilizing bracket to the
pallet (see Figure 2).
M10 Bolts
Figure 2. Removing the Stabilizing Bracket Bolts