EXTENDED BATTERY MODULE INSTALLATION
EATON Powerware
®
9355 UPS (10/15 kVA) User’s Guide S 164201594 Rev C www.powerware.com
47
8. Remove the top front covers of all cabinets.
9. Install the remaining ground straps between each cabinet (see
Figure 33).
10. Reinstall the top front covers removed in Step 8.
Hang the top edge of the cover on the cabinet first, then lower the
bottom edge and snap into place.
11. Continue to one of the following sections:
S “Communication” on page 49 to install UPS communication
options, such as X-Slot cards or remote emergency power-off.
S “Operation” on page 67 to start up the UPS.
NOTE After UPS startup, ensure maximum battery runtime by configuring the UPS for the
correct number of EBMs (see page 77).
Front Ground Strap
Figure 33. Front Ground Strap Installation (2-High Cabinets Shown)
