A SERVICE OF

logo

COMMUNICATION
EATON Powerware
®
9355 UPS (10/15 kVA) User’s Guide S 164201594 Rev C www.powerware.com
50
Installing Communication Options and Control Terminals
To access and install the communication options and control terminals:
1. Remove the front covers of all cabinets, starting with the top
cabinet.
Press and release the handle latch at the bottom of each cover and
then lift the cover up and off the cabinet (see Figure 35).
Figure 35. Removing the Front Covers
2. Install the appropriate X-Slot card and/or necessary cable(s) into the
top cabinet (see Figure 34 and Figure 36).