1-3
PVS 204SA Switcher • Introduction
Features
Twisted pair inputs — The switcher accepts two independent, high resolution RGB
video and audio signals and two composite video and audio signals, transmitted
on twisted pair cable from a source up to 100' (30 m) away.
Video output — The PVS switcher can switch between four inputs (two RGB and
two composite).
Aux/Mix input — The PVS switcher can mix a mono line level audio input with the
audio input from the video/audio source.
Amplified Audio output — The switcher allows user selectable stereo or dual
mono, 4 or 8 ohm audio outputs through the integrated audio amplier.
Executive Mode —
To prevent unauthorized access the switcher panel can be locked
(executive mode) via the front panel or RS-232. An LED on the front panel indicates
executive mode status.
Control and configuration — Firmware updates to the switcher can be made via
a front panel cong port. The switcher can also be congured via RS-232 and
controlled via the front panel, RS-232, or wired IR.
Other features include:
• Amplier indication LED
• User selectable switching of input and status indication LED
• User selectable “single” or “separate” switcher modes
• Rear panel mounted captive screw connector for RS-232, MLC, or IR control
• Rear panel mounted captive screw connector for external volume control
