A SERVICE OF

logo

Open as PDF
next previous
EN Service mode 55
2
Registration page
Note
You must set the registration values if both the formatter and DC
controller are replaced at the same time or if the formatter was
previously installed in another printer. If the DC controller is replaced
by itself, these values are copied from the formatter to the DC
controller. If a new formatter is replaced, or if an NVRAM initialization
is performed (see page 69), these values are loaded onto the
formatter from the DC controller.
Printing a registration page
1 Scroll through the Service menu until PRINT REGISTRATION PAGE is
displayed.
2 Select the paper tray to pull paper from (only when setting left side
margins will the tray actually matter).
3 Press S
ELECT to print the registration page.
www.GovTechMedia.com