A SERVICE OF

logo

Relocating the Library
113ESL E-Series Tape Library User’s Guide
11. Close the library doors and add shipping foam to the bottom of the library
perimeter (see Figure 42).
Figure 42: Adding the shipping foam to the library perimeter
Disconnecting library cables
To disconnect library cables:
1. Disconnect the FC cables connecting from the library to the host.
2. Disconnect the Ethernet cable connecting to the local network.
3. Disconnect the power cord from the library to its power source.
4. Pack the cables removed in step 1 through step 3 with other library
accessories.
5. Disconnect the following cables but leave them routed in the channel:
Drive cluster and card cage power cables
Drive cluster Ethernet cables
Drive cluster I2C cables
Foam