Library Overview
30 ESL E-Series Tape Library User’s Guide
Reset button
To force a manual reboot of the FC interface controller, use the reset button (see
Figure 8 and Figure 9). Press the button with a pen or other small object. You can
also select the Reboot menu option in the Command View ESL, as described
later in this manual.
Caution: Using the Reset button during an ongoing data backup, restore, or
other data transfer process, can result in a disruption of that process and a loss
of data. Before selecting the Reset button, verify that no data is currently
transferring through the FC interface controller by visually inspecting the
Activity LEDs of all I/O ports on the FC interface controller.
Power indicator
The interface controller has one power LED.
■ Green - Power has been applied to this module
■ Yellow - Power-On-Self-Test (POST) in process or processor problems
Serial port
The interface controller is equipped with one serial port. See Figure 8 and
Figure 9 for the location of the serial port.
Note: The serial port is an HP service port not intended for customer use on the ESL
E-series library.
Ethernet port
One Ethernet port with an LED indicator is included in the interface controller.
See Figure 8 and Figure 9 for the location of the Ethernet port.
■ Activity - Port activity
■ Link - Valid Ethernet link
