Web and MAC Authentication
Configuring Web Authentication
Syntax: show port-access web-based config [port-list]
Displays the currently configured Web Authentication
settings for all switch ports or specified ports, including:
• Temporary DHCP base address and mask
• Support for RADIUS-assigned dynamic VLANs (Yes or
No)
• Controlled directions setting for transmitting Wake-on-
LAN traffic on egress ports
• Authorized and unauthorized VLAN IDs
If the authorized or unauthorized VLAN ID value is 0, the
default VLAN ID is used unless overridden by a RADIUS-
assigned value.
ProCurve(config)# show port-access web-based config
Port Access Web-Based Configuration
DHCP Base Address : 192.168.0.0
DHCP Subnet Mask : 255.255.255.0
DHCP Lease Length : 10
Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No
Client Client Logoff Re-Auth Unauth Auth Cntrl
Port Enabled Limit Moves Period Period VLAN ID VLAN ID Dir
----- -------- ------ ------ ------- ------- -------- -------- -----
1 Yes 1 No 300 0 0 0 both
2 Yes 1 No 300 0 0 0 in
...
Figure 3-9. Example of show port-access web-based config Command Output
3-29
