A SERVICE OF

logo

RADIUS Authentication and Accounting
Using SNMP To View and Configure Switch Authentication Features
An alternate method of determining the current Authentication MIB access
state is to use the show run command.
ProCurve(config)# show run
Running configuration:
; J8715A Configuration Editor; Created on release #W.14.XX
hostname "ProCurve"
snmp-server mib hpSwitchAuthMIB excluded
ip default-gateway 10.10.24.55
snmp-server community "public" Operator
vlan 1
Indicates that SNMP access to the
authentication configuration MIB
(hpSwitchAuth) is disabled.
name "DEFAULT_VLAN"
untagged A1-A24,B1-B4
ip address 10.10.24.100 255.255.255.0
exit
password manager
Figure 5-9. Using the show run Command to View the Current Authentication MIB Access State
5-23